Check What Fits Before You Load.

Will It Fit in Your Van? Check Before You Load.

Use our free van load fit calculator to check furniture, parcels, pallets, and bulky items against van dimensions before booking a courier or starting your move.

✓ Free to use✓ No sign-up✓ Built for UK vans

Van Load Fit Calculator

Start with the item measurements, then choose your van.

✦ Free · no sign-up
01

Your item dimensions

Measure the widest points, including packaging, legs and handles.

cm
cm
cm
kg
pcs
cm
02

Choose a van

Example vans are illustrative. For a real check, choose "My van" and enter measured sizes.

Illustrative medium van (SWB): 240 × 160 × 140 cm load space; rear opening 140 × 125 cm; 900 kg example payload. Not a manufacturer specification.

Internal load space

cm
cm
cm

Rear door opening and payload

cm
cm
kg

Your fit result

Example van
REAR DOORSCABTOP VIEW · TO SCALE · 1 ON THE FLOOR
Load floor seen from above
REAR VIEW · DOOR OPENING
Item end-on in the door
Possible fit found

At least one orientation clears the rear door opening and the load space with your 5 cm safety gap. Check the real loading conditions below before you rely on it.

Item volume (total)
1.148 m³ (40.5 ft³)
Item weight (total)
42 kg 5% of payload
Load space
240 × 160 × 140 cm (5.38 m³)
Rear door opening
140 × 125 cm
Best orientation (L × W × H)
180 × 75 × 85 cm
Orientations that fit
2 of 6
How many fit (estimate)
2 (1 long × 2 across, not stacked)
Share of load space used
21%
  • Van figures are an illustrative medium van (SWB). Choose "My van" and enter the measured sizes for a real check.
Built for practical movesDoor, load space and payload in one check
No account requiredNothing to sign up for, nothing stored
Transparent assumptionsEvery result explains its limits
How the calculator works

From "will it fit?" to a clearer answer

The calculator treats your item as a box and the van's load space as a bigger box with a door at the back. It then tries the item in all six orientations: on its feet, on its back, on its side, end on, and so on. For each one it checks two things. Does the item fit inside the load length, width and height with your safety gap? And can its cross-section pass through the rear door opening as it slides in?

Only orientations that pass both checks count. The result shows the best one, a to-scale drawing of the load floor, a drawing of the item in the door, and an estimate of how many identical items would fit. It also adds up the weight and compares it with the van's payload.

How to measure furniture and parcels

Use a steel tape and measure each item at its widest points, not the neat body of it. That means including legs, handles, hinges, rolled arms, plinths and any packaging or blankets you will wrap it in. Round up to the next centimetre. Measure parcels as they will travel, with the tape on the outside of the box. If anything comes apart, such as sofa feet or table legs, measure it in the state you will load it.

Why loading clearance matters

On most panel vans the rear door opening is smaller than the space behind it. The door frame, hinges and the roof structure sit inside the van's outline. So a wardrobe can be shorter than the load length and narrower than the load width and still not go through the doors. Allowing a few centimetres of clearance also gives you room for your hands and stops you scraping the item or the van.

Cubic volume is not the same as physical fit

A van advertised at 6 m³ will not hold any 6 m³ of goods. A 2.2 m long sofa takes up barely 1.6 m³, but it needs 2.2 m of uninterrupted floor. Wheel arches, the door aperture and the way items stack all eat into usable space. Volume is great for comparing van sizes and estimating trips. For a single bulky item, the measurements and the door decide.

Example measurement

Three numbers, one clearer decision.

HWL
LengthFront to back
WidthSide to side
HeightFloor to top
Practical loading guidance

Before you hire or load

Choose the van for your longest item, not just your total. Measure the sofa, the wardrobe or the bed base first and find a van whose load length and door opening clear it. Then check the overall volume.

Avoid the classic mistakes. People forget the wheel arches, which can leave much less than the quoted width at floor level. They measure a box but not the handles, and they assume the side door is as tall as the rear one.

Respect the payload. Payload is the weight you can add to the empty van, and the driver and passengers come out of it. Building materials, white goods and boxes of books add up quickly, so estimate weights and run the payload calculator.

Check the doors. Ask the hire company for the rear and side door opening sizes as well as the load dimensions. If the item is close, measure the van yourself before you load.

Load safely. Put the heaviest items low and against the bulkhead, keep weight spread evenly left to right, fill gaps so nothing can slide, and strap everything to the tie-down points. Read our guide to packing boxes in a van.

Frequently asked questions

Good questions. Clear answers.

Can this calculator guarantee my furniture will fit?

No. It checks rectangular measurements and rear-door clearance under simplified assumptions. Wheel arches, the shape of the doors, lining and the room you have to manoeuvre can all change the real result.

Does it work for any van model?

Yes, if you choose "My van" and enter its measured load space, door opening and payload. The small, medium, large and Luton presets are illustrative examples, not figures for a specific make or model.

What is the difference between load volume and usable space?

Volume is the total capacity in cubic metres. Usable space depends on the shape of the load area, the door opening and how well your items pack together, so enough volume does not prove a load will fit.

What should I check before loading a heavy item?

Confirm the van's real available payload, its axle limits, how you will lift the item safely and where it will sit. Heavy items go low and forward, strapped to the tie-down points.

Latest guides

Useful advice before you load.

Practical, plain-English guides on measuring, loading and booking, written for UK drivers and movers.

Browse all guides